5-Inch Wafer Packaging

125 mm Wafer Packaging & Components

Browse 125 mm wafer packaging by supplied configuration, including complete assemblies and individual jars, liners, separators or cushion components. Verify the contents of each product listing before treating it as a complete shipper.

MC-5TD Tyvek Wafer Separator

Tyvek Wafer Separators

MC-5TD 5-inch Round Tyvek Wafer Separator

$0.225
MC-125TD Tyvek Wafer Separator

125mm (5")

MC-125TD 125 mm Round Tyvek Wafer Separator

$0.225
MC-5AFD Soft Wafer Cushion Disc

125mm (5")

MC-5AFD 5-inch Soft Wafer Cushion Disc, 0.25 inch

$0.650
MC-5AFDF Firm Wafer Cushion Disc

Wafer Cushion Foam Discs

MC-5AFDF 5-inch Firm Wafer Cushion Disc, 0.25 inch

$0.775
MC-5AFDF-1/8 Firm Wafer Cushion Disc

Wafer Cushion Foam Discs

MC-5AFDF-1/8 5-inch Firm Wafer Cushion Disc, 0.125 inch

$0.660
MC-125AFD Soft Wafer Cushion Disc

125mm (5")

MC-125AFD 125 mm Soft Wafer Cushion Disc, 0.25 inch

$0.650
MC-125TD-SQ Tyvek Wafer Separator

Square Wafer Separators

MC-125TD-SQ 125 x 125 mm Square Tyvek Wafer Separator

$0.325
6-inch outer wafer jar and lid used for the MC-605502JL 5-inch packaging configuration

125mm (5")

MC-605502JL 5-inch Wafer Jar and Lid, 1.5 inches Deep

$7.480
6-inch outer wafer jar and lid used for the MC-605503JL 5-inch packaging configuration

125mm (5")

MC-605503JL 5-inch Wafer Jar and Lid, 3 inches Deep

$8.790
MC-502SW WafPak Wafer Packaging Assembly

125mm (5")

MC-502SW 5-inch WafPak Wafer Shipping Assembly, Open-Cell

$22.950
MC-503SW WafPak Wafer Packaging Assembly

125mm (5")

MC-503SW 5-inch WafPak Wafer Shipping Assembly, Open-Cell

$35.500
MC-605502JLF Lined Wafer Jar

125mm (5")

MC-605502JLF 5-inch Lined Wafer Jar, Closed-Cell

$11.340

Complete Assembly or Individual Component?

Products in this category are not all supplied in the same configuration. Review the individual product description for exactly what is included rather than assuming every 125 mm listing contains the jar, liner, cushions and separators.

Assembly contentsConfirm the jar or housing, liner, cushion discs, separator material and quantities included under the exact part number.
Loaded stack heightCalculate wafer count plus separators and cushions against the usable depth of the selected jar.
Material requirementsMatch liners, separators and cushions to permitted contact surfaces, ESD requirements and particle limits for the process.

Qualification Notes for 125 mm Wafer Packaging

Do not treat generic category claims as certification of the complete loaded package. If a cleanliness level, material test, certification or specific ESD requirement applies, identify it with the exact configuration so documentation and applicability can be reviewed.